SHOTGUN PARTS

Remington 870 Police Carrier Dog Follower Spring (Carrier Latch Spring)

Remington 870 police Carrier Dog Follower Spring (Carrier Latch Spring) If you are ordering for the USA please go to our US site  www.sjhardware.us, it will be cheaper shipping and faster Remington 870 Carrier Dog Follower Spring (Carrier Latch...

Benelli M4 Combat Charging Handle

SJ D.S.C - Detachable Shotshell Strip

Made from the best Mil Spec webbing we could get our hands on, all 100% US and Canadian made product. D.S.C is a 12ga Detachable Shotshell Carrier for shotguns designed for when traditional aluminum or plastic shot shell holders are not available.For...

Remington 870 Jumbo Safety

The S&J Hardware Jumbo Combat Safety is much larger than OEM safety. The ergonomic design allows you to feel the safety and its current condition very easily through gloves. It is also easier to find in low and no light conditions, and allows more...

BENELLI M4 Bolt Assist Device MOD 1

Made from spring steel that has been post production cycle heat treated to give the correct amount of spring tension as well as min 500.000 cycle longevity.Zinc plated and then cerakoted graphite black.We also incorporated an over travel tab on the one...

Mossberg No Jam Short Follower

MOSSBERG TYPE 3 MAGAZINE FOLLOWER S&J Hardware NoJam Design Mossberg Type 3 Magazine Follower For 12 Gauge Considered to be the best tactical follower available. CNC Machined from a solid piece of DuPont...

PowerFeed No Jam Combat Shotgun Follower Type 3 HiVis Green

Our Type 3 mag follower is the best on the market today, will not break down with cleaning compound and will not crack. CNC milled from 2 inch block of Safety Green Or DuPont Delrin®, it does not react to heat or cold, and thus reduces jamming. The...

Beretta 1301 Canadian Legal Mag Tube

This magazine tube has been modified to meet Canadian capacity requirementsThis tube will fit flush with an 18.5″ barreled Beretta 1301 12 gauge shotgun.This will allow one round of 3″ shells for a total of 5.9 rds of 3 inch shells...

PowerFeed No Jam Combat Shotgun Follower Type 2 HiVis Green

Our mag follower is the best on the market today, will not break down with cleaning compound and will not crack. CNC milled from 2 inch block of Safety Orange Or DuPont Delrin®, it does not react to heat or cold, and thus reduces jamming. The follower...

UNIVERSAL 12GA SPRING AND POWERFEED NO-JAM FOLLOWER

12 gauge Spring & No Jam Follower Kit.Replacement shotgun magazine spring and S&J Hardware No-Jam magazine follower. Magazine spring is 48 inch long will fit most 12ga shotgunsSpring is extra long, so it will probably need to be trimmed to size.

Turkish to Rem 870 Stock Adaptor Plate

Will let you use any Remington 870 & Rem870 Knoxx stock or Magpul shotgun stock on semi & pump most turkish shotguns 12ga shotguns.HatsanATAUzkonDeryachurchillCNC machined from 6061T6Type III finishCNC milled 416 Stainless Nut *Not...

Detachable Shotshell Carrier Pouch MkIII

Carrier pouch includes three 6-shot individual D.S.C.'s  (detachable Shell Carriers). These D.S.C.'s can be left in place within the pouch or quickly removed and placed on any Velcro surface. Included is one 3M industrial strip for mounting on your...

Remington 870 Bayonet Lug Mount - Black

Machined from solid 4140 steelMil spec parkerised finishMade in canadaThe S&J Hardware’s Remington 870 bayonet attachment allows you to mount any M16 bayonet on a remington 870 with factory +2 or +3 mag tube!

Turknelli Breaching Choke Tube

Benelli Mobile choke system Cly bore Black painted finish over stainless steel Benelli Mobile choke system Cly bore Black painted finish over stainless steel    

Aridus Beretta 1301 Stock Adapter Magpul SGA

 Now use the best shotgun stock ever designed with one of the best semi-auto shotguns available.  The Aridus Stock Adapter allows the use of the Magpul Mossberg SGA shotgun stock with Beretta 1301 Tactical and 1301 Competition shotguns.The ASA is CNC...

Aridus Beretta 1301 Handguard Assembly BLACK

 The Beretta 1301 Handguard Assembly makes use of a modified Magpul Zhukov handguard adapted for the Beretta 1301 Tactical and Competition shotguns. The Zhukov handguard features M-LOK slots which can be used to effectively mount lights, slings,...

PowerFeed No Jam Combat Shotgun Follower Type 1 HiVis Orange

Our mag follower is the best on the market today, will not break down with cleaning compound and will not crack. CNC milled from 2 inch block of Safety Orange Or DuPont Delrin®, it does not react to heat or cold, and thus reduces jamming. The follower...

Mossberg 590, 535, & 835 Series Mag Tube MK II

CNC Milled from a solid block of 4140 steel.Comes with our CNC machined green no-jam delrin mag follower and 600,000 cycle count spring and 3 position front sling mount. Made in Canada. Will fit Mossberg 590,535,835 and 935.  3 position front sling...

M1913 Scope Base for Mossberg Shotguns

One-piece, MIL-STD 1913 Picatinny rail allows mounting a variety of optics and tactical sights on popular Mossberg, Remington, and Benelli shotguns.Streamlined, low profile design installs to the top of the receiver for a smooth “built-in” appearance...

Shotgun Mag Tube Clamp

Shotgun Mag Tube Clamp Confirmed fitment on: Browning BPS policeRem 870,1100,1187Benelli m1,m2,sbeMoss 500 7 shotWin 1200,1300 7 shotNorinco/hawn hp9Pardner 18inch

EBR Extended Bolt Release 2.0

ARIDUS DETACHABLE CARRIER

 Whether you’ve got multiple Q-DCs you need to supply, or you’re looking to stock up with great pricing, we’ve got you covered!Spare shell holders with same great quality and attention to detail as the ones you get with your side saddle kits. Whether...

TURKISH SHOTGUN FOLLOWER AND SPRING KIT 12ga

Turkish Shotgun Follower and Spring KitGet rid of that clunky rough feeling when cycling your shotgun.Fits: Hatsan, Charles Daly, Citadel, Tristar, Stoeger, Sarzilmaz, Uzkon, and other shotgunsIncludes:S&J Hardware NoJam Type 5 FollowerExtra Power...

Remington Series Magazine Extension - MKII

S&J Hardware's world-famous Remington Mag Tube Extention - MK IIFits: Remington 870,1100,11-87 & Versamax+1 - 2.75 inches long+2 - 6.76 inches long+3 - 8.75 inches long CNC Milled from a solid block of 4140 steel. Bead blasted nitride black.Comes...

BENELLI NOVA +2 MAG EXTENTION

CNC Milled from a solid block of 4140 steel.Comes with our 600,000 cycle count spring. Does not come with the sling plate or follower due to the dimensions of the tube. Made in Canada.

Strike Industries Hayl Rail MLOK Handguard for Benelli M4

Package include – 1x MLOK handguard for Benelli M4 – 1x 1.5mm Hex wrench – 4x Anti-rotation set screw Features -MLOK compatible -Lightweight, Drop-In piece -Durable 6061 Aluminum construction – 6.6 oz total installed weight The Benelli M4 is the gold...

Benelli Nova +1 Mag Extension

Will also fit many other made in Italy & Turkish shotguns.CNC machined from solid steel.Comes with:3 position front sling mount and spring

EBR Extended Bolt Release Benelli M2-M4

Aridus Beretta 1301 Handguard Assembly FDE

THIS IS A PRE ORDER  FOR ITEMS ARRIVING END OF THE APRIL,  WE EXSPECT THESE TO SELL OUT FAST  AND NO ETA ON THE NEXT SHIPMENT DUE TO HIGHT DEMANDThe Beretta 1301 Handguard Assembly makes use of a modified Magpul Zhukov handguard adapted for the Beretta...

Aridus REMINGTON 870 - QUICK DETACH CARRIER

The Remington model is designed around the 870, but will fit the screw pattern of the 11-87 and 1100 (though trimming of the fore ends may be necessary).Receiver adapter machined from a block of 6061-T6 USA made aluminum and commonly being accused of...

Uzkon/Hatsan Jumbo Safety

Suitable for use with gloved hands. Sure activation and deactivation. Easy to install. will fitwill fit Uzkon and Hatsan brand of turkish shotguns as well and many other turkish OEM breandsMachined from solid 4140 steelNitride finish in blackMade in...

Aridus Latch and Shroud Beretta 1301

 The YT-1301 is a latch and shroud to be used with the Beretta 1301 in order to address the potential of the catastrophic shell dump malfunction. Both the Latch and Shroud are machined from 6061 aluminum and Type III hard coat anodized. The YT-1301 comes...

Pardner Pump 20 Gauge Follower TYPE 4

Pardner Pump 20 Gauge Follower Type 4 GreenS&J Hardware NoJam Design For 20 GaugeCNC machined from a solid block of DuPont Delrin

Mossberg 930 Combat Charging Handle Gen 2

Magpul Forward Sling Mount for 590A1

Magpul MOE M-LOK Forend for Mossberg 590 FDE

FEATURES Compatible with Mossberg 590/590A1 12ga shotguns Reinforced polymer constructions Increased length for improved pump manipulation Does not overlap receiver for sidesaddle compatibility M-LOK slots for direct attachment of accessories...

POWERFEED - 20 GAUGE UNIVERSAL NO-JAM FOLLOWER

The button on the face of the follower tells you by touch that your magazine is empty.Type 1 design features a shaft on the back that prevents the mag spring from binding when overly compressed.CNC Machined from a solid block of DuPont DelrinSelf...

Turkish Single Point Sling Plate

Single point sling mounts for the Tristar Cobra and Viper shotguns.An ambi single point sling mount for the Tristar shotgun.Being that the TriStar guns are based on the Fabarm brand of shotguns , there were some changes made to our Fabarm sling plate...

Magpul SGA Remington 870 Buttstock

Remington 870 BAYONET MOUNTING KIT +2 MAG EXTENSION Mk 2

Remington 870 Bayonet mount kit Mk II Kit Includes: +2 round Magazine tube 6.75 inch length Bayonet mounting end cap 1 piece steel M16 bayonet mount clamp (will work with M7 or M9 bayonet or any Nato standard M16 bayonet) S&J Hardware “No...

Magpul MOE M-LOK Forend for Remington 870 - blk

The Magpul MOE M-LOK Forend is a drop-in upgrade that provides your shotgun with improved ergonomics and the modularity of the M-LOK accessory attachment system. The extended length, ribbed body, and integrated handstops allow for positive weapon...

Aridus Industries Mossberg 500/590 Q-DC

Benelli M1, M2, SBE, Stoeger Jumbo Safety

Suitable for use with gloved hands.Sure activation and deactivation.Easy to install.Fits:Benelli M1Benelli M2Benelli M3Benelli Super Black EagleStoeger M3000Stoeger M3500.

Aridus UNIVERSAL - QUICK DETACH CARRIER

 The Universal Q-DC is compatible with most pump action and semi-auto shotguns. Due to the trigger assembly pins and the shape of the Universal Receiver Adapter, it is not recommended for Remington 870s or the Mossberg 500/590. Please choose the hard...

Magpul MOE M-LOK Forend for Remington 870 - FDE

The Magpul MOE M-LOK Forend is a drop-in upgrade that provides your shotgun with improved ergonomics and the modularity of the M-LOK accessory attachment system. The extended length, ribbed body, and integrated handstops allow for positive weapon...

Sierra RD Optics Plate

Machined from 6061 T6 Aluminum. Optics cut is machined for Aimpoint T2, Holosun 403 footprint or; Trijicon RMR, Holosun 507/508 footprint. Milspec Type 3 Class II Anodizing Comes with all mounting hardware. Installation instructions included. Pictures...

EBR Extended Bolt Release 3.0 Mossberg 930

Mossberg 930 Series Mag Tube Extension MK II

CNC Milled from a solid block of 4140 steel. Bead blasted nitride black.Comes with our CNC machined green no-jam delrin mag follower and 600,000 cycle count spring and 3 position front sling mount. Will fit standard Mossberg 930 models.  Made in...

BENELLI M4 Bolt Assist Device MOD 3

BAD Tab 3.0 has arrived!!We are always looking to improve our products.BENELLI M4 Bolt Assist Device.It is made from steel, zinc plated and then finished in cerakote.Our MOD 3 comes with a laser cut strip of 3M Fine Grip tape installed for those looking...

Benelli M4 Canadian Legal + 1 Mag Tube Extension

This magazine tube has been modified to meet Canadian capacity requirements.This tube will fit flush with an 18.5″ barreled Benelli M4 12 gauge shotgun.This will allow one extra round of 2.75″ shells for a total of 5.9 rds of 3 inch shells,...

Benelli Nova /Super Nova +3 MAG EXTENTION

CNC Milled from a solid block of 4140 steel. Comes with our 600,000 cycle count spring and 3 position front sling mount. Does not come with our follower due to the Nova magazine tube being a weird dimension. Made in Canada.