Product Description
Universal 48" Magazine Tube Spring for 12 GA Shotguns.
Tested for 1 Million Cycles.
This spring is 48" long and will need to be cut to length.
Made in Canada
Installation: **Images included; white tag indicates where the cut should be made.**
Remove your magazine tube cap, and spring. Insert new spring until it is seated firmly in the follower in the end of your magazine tube. Measure approximately 4 inches beyond the end of your magazine tube and cut. Re-attach your magazine tube cap.
If also installing a magazine tube extension, cut 4 inches beyond the end of where the installed magazine extension would sit.
