Product Description
SureShell Carrier And Rail For Ben SuperNova (12-GA)
Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mount via a “saddle” style method (Remington shotguns) or by using the drilled and tapped holes on top of the shotgun’s receiver.
SureShell Aluminum Shotshell Carriers with Rail are machined from 6061-T6 aluminum and use Mesa Tactical’s innovative rubber friction retention system to firmly and reliable hold shells in place until needed. Four, six and eight shell configurations and multiple rail lengths available.
The Integrated Rail SureShell shotshell carrier design for the Benelli M2 Tactical, Benelli M4/M1014, Benelli SuperNova and Mossberg 500/590 platforms is radically different from the side mount designs. Instead of a stamped backing plate, the shell carrier yoke is attached to a machined bracket with an integral Picatinny (MIL-STD 1913) sight rail.
The design allows the ShotShell assembly to be installed on the top of the shotgun by taking advantage of the factory tapped Picatinny (MIL-STD 1913) rail holes.
With the Benelli shotguns, the shell carrier assembly is mounted directly onto the shotgun receiver. With the Mossberg platforms, a steel mounting cleat is first installed and the shell carrier is fastened to the cleat.
FOREND COMPATIBILITY
Factory shotgun forends, except “tactical” forends, often feature significant receiver overlap when the bolt is pulled back. These forends will need to be cut down or replaced with aftermarket “tactical” forends to be used with some SureShell shotshell carriers. Before you install a SureShell shotshell carrier, measure your forend’s receiver overlap and compare it to the furthest forward point of the shotshell carrier. Then cut any potential overlap or interference off the end of the forend with a miter saw or a rotary arm saw for a perfect fit.
